Dunkelblauer ORIGNEE Seidenkissenbezug nach Maß auf einem Kissen mit seitlichen Einbuchtungen und gerundeten Enden

Custom-made silk pillow cover for ergonomic pillows

Looking for a silk cover for your ergonomic pillow? An ORIGNEE practical example shows which photos and dimensions we need and how the custom-made process works.

You have found an ergonomic pillow that you enjoy sleeping on – but you are missing a suitable silk cover? Especially with neck support pillows, curved contours, or unusual sizes, the selection of a larger standard cover is often not sufficient. At ORIGNEE, we check whether a custom-made silk pillow cover can be made for your existing pillow – even as a single item.

Request custom-made cover → For an initial assessment, photos, approximate dimensions, and your desired color are sufficient.

Why a standard cover often does not fit special pillow shapes

For a rectangular pillow, length and width are primarily important. An ergonomic pillow may also have sides of different heights, a hollow, or pronounced curves. A cover that is too loose can bunch up at narrower sections; a cover that is too tight may be difficult to pull on or may compress a soft pillow.

Therefore, for a custom-made cover, we also consider the height, the contours, and the opening for putting it on. The goal is a cover that is easy to put on and take off in everyday use and fits the existing pillow shape.

An example from our work: a silk cover for a special pillow shape

The photo shows an ORIGNEE custom-made cover in dark blue silk. For a pillow with side hollows and pronounced curves, we made a suitable cover. Such contours cannot be sufficiently described by providing "length × width" alone.

When you request a similar shape, we therefore first look at the existing pillow together: Which areas need to be considered? What dimensions are still missing? And is an existing cover useful as a template? This is how we clarify the design before production begins.

What information do we need for a custom-made silk pillow cover?

For the initial contact, you do not need to create a technical drawing yet. Please send us, if possible:

  • Photos from above and from the side: The entire pillow and its contours should be clearly visible. An additional view of the underside can be helpful for special shapes.
  • Length, width, and height: Measure the pillow loosely, without compressing it. For sides of different heights, please provide both heights.
  • Special contours: Photograph hollows, recesses, and curves, if possible, with a measuring tape placed next to them.
  • Brand and model, if known: This information helps us categorize it, but does not always replace the dimensions of your specific pillow.
  • Desired color and quantity: Also let us know if you prefer an existing closure or a specific design.

We will check your information and tell you what additional information we may need. Dimensions on packaging are a good starting point; for complex shapes, they are often not sufficient for production.

When is an existing pillow cover helpful as a template?

If your current cover fits well, it can be a helpful template for a complex shape. Please only send it after consultation: We will first clarify whether the template is needed, how it will be shipped, and what costs may arise.

If you do not have a suitable cover, we will first check based on your photos and dimensions whether production is possible. Not every shape can be reliably reproduced from a few external dimensions.

Personally select the fabric and color

A custom-made cover should not only fit the pillow, but also your expectations of color and feel. We will advise you on the available silk and check the desired color. Upon request, we will send you available fabric samples free of charge.

If you are still weighing materials, our guide "Silk or cotton: Which pillow cover is better?" will help. For later cleaning, please note the care label of the finished cover; general information can be found under How to properly wash and care for silk.

How much does a custom-made cover cost and how long does it take?

The price depends on the material, size, shape, design, and amount of work. A rectangular cover in a special size requires different planning than a cover with multiple curves and recesses. Therefore, we will create an individual quote.

After receiving all the necessary information, you will generally receive a non-binding quote within 2 business days. After order confirmation and, if applicable, receipt of the template, production and delivery will generally take place within 4–6 weeks.

Frequently asked questions about silk covers for ergonomic pillows

Can I order just one cover?

Yes, at ORIGNEE, we also check selected custom-made items as single items. Send us your request with photos, dimensions, and desired color.

Are the dimensions on the packaging sufficient?

They can help with an initial assessment. For curved or differently high pillows, we usually need additional views and dimensions or, after consultation, an existing cover as a template.

Can every type of ergonomic pillow get a silk cover?

We check the feasibility for the respective model. The shape, construction, and the possibility of putting the cover on and taking it off later are particularly important.

Is your pillow special? Show it to us.

Send photos, approximate dimensions, your desired color, and the desired quantity to info@orignee.de. We will check your request and discuss the next steps with you.

Request a custom-made silk pillow cover →

For standard rectangular pillows, you can find our available models under Silk pillow covers.